Harford County Maryland
Harford County, Maryland
Harford County Maryland  
Harford County Maryland
David R. Craig, Harford County Executive
Harford County Maryland

Department of Public Works
212 South Bond Street, Bel Air, MD 21014 410.638.3285 / 410.879.2000
Frequently Asked Questions Harford County Community Services Downloads Harford County Public Works Contacts

TRANSPORTATION ENGINEERING
FREQUENTLY ASKED QUESTIONS

Q:

Why are there paint marks in the road?

A: These usually mean that some type of road construction is probably about to take place. These marks have been painted by Miss Utility and show the location of utilities located in the road, i.e., gas - yellow, water - blue, sewer - green, electric - red, and telephone - orange.
Q:

What are the little flags in my front yard?

A: These flags have been placed by Miss Utility and represent underground utilities. Miss Utility has been requested to locate these utilities for a future project.
Q:

Is the road going to be widened?

A: Many factors determine whether a road should be widened. The first step would be to perform a traffic study. Most of the time these are initiated by citizens’ complaints or the need to correct a problem due to growth in the area. Other factors which come into play are the amount of traffic now on the road, safety concerns, and the number of accidents on the road.
Q:

County water is running across my property, please divert it somewhere else?

A: The first thing the County would do is determine exactly where the water is coming from and whether it is a County problem or one that needs to be addressed by the developer or adjacent property owners. Sometimes a neighbor can change the grade of his property, creating water problems for his neighbors. If the County decides it is a County problem, they will send an inspector to the area to make sure it is not being caused by routine maintenance, such as a clogged pipe or culvert, a curb that needs to be replaced, or a drainage ditch that needs to be cleaned out. If it is shown to be a grading problem, a County surveyor would be sent to the area to make a topographic study taking elevations of the area to determine the best means for correcting the problem.
Q:

How can I get a signal constructed at an intersection?

A:

Both the County and the State are responsible for installing traffic signals on County and State roads. If the intersection involves a State and a County road, the State becomes responsible for installing the signal. The request for a traffic signal usually comes from citizens in the area. A traffic count is performed and the accident history of the intersection is researched. Then, if the intersection meets federally established criteria, the light is programmed into the Capital Account and installed. It usually takes about a year from the receipt of the request to the installation of the light.

Harford County Government, Maryland Questions or comments webmaster@harfordcountymd.gov
Copyright © 1997 Harford County Government. All rights reserved.
Disclaimer... | Privacy Statement...